Milwaukee M18 Fuel 2953-20 (Gen 4) vs Dewalt 20V Max XR DCF845

Milwaukee 2953-20 Angle 5

Milwaukee 2953-20

Quick take

The Milwaukee M18 Fuel 2953-20 and Dewalt 20V Max XR DCF845 are high-performing impact drivers in different areas. The 2953-20 pushes out much more torque, but both models are blazingly fast under load. The DCF845 offers a longer battery run time and is significantly lighter, though longer tip to tail.

Brand Milwaukee
Platform M18 Fuel
Motor Brushless
Tested torque in-lbs 1,236.0
IPM 4,400.0
Drive modes 4
Collet 1/4-inch hex
Same as M18 gen 4
Brand Dewalt
Platform 20V Max XR
Motor Brushless
Tested torque in-lbs 612.6
IPM 4,200.0
Drive modes 3
Collet 1/4-inch hex
Same as DCF845B

Editorial opinion

Rating

4.72 / 5 ⭐️’s

Methodology used: Heavy duty

Pros

  • Best-in-class driving performance
  • Versatile drive modes improve accuracy
  • Compact footprint fits into tight spaces
  • Brushless motor improves efficiency and durability
  • Long tool and battery warranty

Cons

  • Poor battery run time

Rating

4.40 / 5 ⭐️’s

Methodology used: Heavy duty

Pros

  • Excellent battery run time
  • Great torque and driving speed
  • Brushless motor
  • Versatile drive modes
  • Long tool and battery warranty
  • One-handed bit changes

Cons

  • Long collet to back length
  • Not ideal for light-duty tasks

Global rankings

21 models tested

TestResultRank
Driving speed (sec.)11.21
Torque (in-lbs)1,236.01
Battery run time (min.)26.018
RPM3,788.01
Bare weight (lbs)2.2017
Impacting noise (dBA)95.25
TestResultRank
Driving speed (sec.)12.82
Torque (in-lbs)612.610
Battery run time (min.)49.05
RPM3,214.07
Bare weight (lbs)2.0311
Impacting noise (dBA)97.412

Kit and bare tool options

2953-22

Includes (2) M18 Red Lithium XC 5Ah battery

Lab results

Design & ergonomics

Stands upright w/o battery: Yes
Stands upright w/ battery: Yes
Grip material: Rubber overgrip
Magnetic holder: No
Bit holder: No
Belt hook: Yes
Handle angle (deg.): 75.0
Head angle (deg.): 90.0

The 2953-20 stands upright with and without a battery and has a moderately aggressive forward lean, providing ample reach in certain driving situations. The entire grip is also covered in a soft rubber overmold for shock absorption. The quality of the overmold feels noticeably more premium than most impact drivers, including within Milwaukee’s M12 and M18 lineup.

The included belt hook is mountable on either side, but no bit holder is included and there’s no onboard magnetic fastener storage. Several Ryobi impact drivers have these built-in features, which would enhance the 2953-20’s versatility.

Design & ergonomics

Stands upright w/o battery: Yes
Stands upright w/ battery: Yes
Grip material: Rubber overgrip
Magnetic holder: No
Bit holder: No
Belt hook: Yes
Handle angle (deg.): 80.0
Head angle (deg.): 90.0

The DCF845’s ergonomic shape curves well to your hand, and the rubber overgrip covers a large surface area, great for gripping power and shock absorption. The forward-leaning handle angle is also reasonably aggressive, providing extended driving reach.

Otherwise, the DCF845 includes a standard belt hook but no bit holder or magnetic fastener plate. Several Ryobi impact drivers have a bit holder and magnetic fastener plate onboard without buying a third-party add-on.

Weight

Milwaukee 2953-20 On Scale

Bare weight (lbs): 2.20
Weight w/ 2Ah battery (lbs): 3.15
Weight w/ 2.5Ah battery (lbs):  Not tested
Weight w/ 4Ah battery (lbs):  Not tested
Weight w/ 5Ah battery (lbs): 3.81

The 2853-20 is designed for brute performance, not reducing weight. In its bare tool form and with a battery, it’s a reasonably heavy impact driver.

The working weight can differ significantly depending on the battery run in your setup, which is why we tested the weight in different configurations. To keep it lightweight, we recommend combining the 2953-20 with Milwaukee’s M18 Red Lithium CP 2Ah battery for a good balance of performance and weight.

If weight is less of a concern, pair the 2953-20 with Milwaukee’s M18 Red Lithium XC 5Ah battery for a longer run time and improved driving performance.

Compare weight test results

Weight

Dewalt DCF845 On Scale

Bare weight (lbs): 2.03
Weight w/ 2Ah battery (lbs): 2.83
Weight w/ 2.5Ah battery (lbs):  Not tested
Weight w/ 4Ah battery (lbs):  Not tested
Weight w/ 5Ah battery (lbs): 3.43

The DCF845 isn’t lightweight in its heavy-duty driving class, instead, middle of the pack. The Makita 18V LXT XDT19Z sheds some weight and is a better option if you covet a light, equally powerful setup.

The working weight can differ significantly depending on the battery run in your setup. To keep it as lightweight as possible, We recommend combining the DCF845 with Dewalt’s new 20V Powerstack 1.7Ah battery, which weighs less, has a smaller footprint, and performs better than Dewalt’s 20V Max 2Ah battery, which is a solid alternative for a svelte setup.

If weight is less of a concern, pair the DCF845 with Dewalt’s 20V Max XR 5Ah battery for a longer run time and improved driving performance. Moreover, this setup is one of the lightest 5Ah kits we’ve come across.

Compare weight test results

Footprint

Milwaukee 2953-20 Footprint1
Milwaukee 2953-20 Footprint2

Max height (bare tool, in.): 7.875
Max width (bare tool, in.): 2.625
Collet to back length (in.): 4.375
Base length (bare tool, in.): 3.250
Base width (bare tool, in.): 2.625
Trigger circumference (in.): 6.500
Handle circumference (in.): 5.125

The 2953-20 has an incredibly compact stubby-like head, rivaling the collet-to-back length of many sub-compacts. However, it’s a bulky tool viewed from certain angles. The max width and height are somewhat extended.

Compare footprint test results

Footprint

Dewalt DCF845 Footprint1
Dewalt DCF845 Footprint2

Max height (bare tool, in.): 7.375
Max width (bare tool, in.): 3.000
Collet to back length (in.): 5.125
Base length (bare tool, in.): 3.500
Base width (bare tool, in.): 3.000
Trigger circumference (in.): 6.750
Handle circumference (in.): 5.125

The DCF845 has a narrow profile but isn’t highly compact like the Dewalt 20V Atomic DCF850, which has a far shorter collet-to-back length. Held in hand, the DCF845 still feels nimble compared to some of its competition.

Compare footprint test results

Motor

Motor: Brushless
Impacts per minute: 4,400.0

The 2953-20 includes Milwaukee’s Powerstate brushless motor, which improves driving efficiency, battery performance, and durability over comparable brushed motors.

The high advertised impacts per minute, combined with its torque and RPM profile, explain why the 2953-20 so capably breezes through heavy-duty tasks, as demonstrated in our driving tests.

Motor

Motor: Brushless
Impacts per minute: 4,200.0

As should be expected at this price point, the DCF845 includes a brushless motor, which improves longevity, battery efficiency, and driving performance compared to a brushed motor. This motor choice explains some of the impressive battery run time and driving speed performance.

The high advertised 4200.0 impacts per minute also explain the capable driving performance.

Drive modes

Milwaukee 2953-20 Drive Modes

Drive modes: 4
Drive mode 1:  High speed 
Drive mode 2:  Medium speed 
Drive mode 3:  Low speed 
Drive mode 4:  Self-tapping 
Variable speed trigger: Yes

Four driving modes on the 2953-20 improve driving versatility over single-mode models. Drive modes we label as 1, 2, 3, and 4 correspond to high speed, medium speed, low speed, and self-tapping screw modes. The advertised impacts per minute for the speed modes are 4300.0, 3400.0, and 1200.0, respectively.

Drive mode 1 is ideal for heavy-duty tasks, such as driving lag bolts, decking screws, and structural screws. This mode doesn’t offer a clean and accurate screw finish with such high torque and speed.

However, drive mode 2 offers better accuracy while retaining solid torque. This driving mode has sufficient power to drive screws into dimensional lumber, treated lumber, plywood, and hard and softwood.

Drive mode 3 is ideal for the most accurate and consistent screw finish in most materials, including harder woods and dimensional lumber.

The 2953-20 is more powerful across each drive mode than competing models set to equivalent high, medium, and low-speed modes. This powerful performance profile explains why we suggest using the low-speed mode to finish screws. In contrast, we typically prefer using the medium-speed mode to accurately recess screws with other, less powerful impact drivers.

In the self-tapping mode, the collet spins until impacting and stops shortly after. Milwaukee has optimized this setting for driving #8, #10, and #12 self-tapping screws between 1/2-inch to 1-inch in 18-22 gauge sheet metal.

Drive modes

Dewalt DCF845 Drive Modes

Drive modes: 3
Drive mode 1:  High speed 
Drive mode 2:  Medium speed 
Drive mode 3:  Low speed/tightening 
Drive mode 4:  N/A 
Variable speed trigger: Yes

The DCF845 includes the essential drive modes that most users need. There’s a high and low speed impacting mode and a precision driving mode.

The precision mode works well for light-duty tasks, such as general woodworking or driving soft screws in a pinch when your cordless drill is out of reach. But we found ourselves using drive mode 2 more frequently when precision was paramount, such as accurately recessing screws into MDF and drywall studs. The increased driving power is more versatile than what’s offered with the precision drive mode while retaining most of the same accuracy.

Users desiring best-in-class driving versatility should look to a Makita impact driver. The Makita 18V LXT XDT19Z and Makita 40V XGT GDT01Z include similar drive modes as the DCF845 but layer in additional assist modes, including self-tapping and bolt-specific settings.

Driving speed

GRK total driving time forward (sec.): 11.2
GRK average driving time forward (sec.): 2.2
GRK total driving time reverse (sec.): 8.7
GRK average driving time reverse (sec.): 1.7

Milwaukee generated impressive driving speed performance in our heavy-duty tests. The 2953-20 powerfully drives big screws and lag bolts, resulting in one of the fastest results driving GRK screws in our speed test. The 2953-20 is among the few impact drivers to buy if brute force driving power is essential.

Also consider the Makita 18V LXT XDT19Z and Dewalt 20V Max XR DCF845 for impressive driving performance.

While the 2953-20 offers solid accuracy and driving versatility in its class, we don’t recommend it as an all-around impact driver around the home. It is overpowered for many DIY tasks.

Compare driving speed test results

Driving speed

GRK total driving time forward (sec.): 12.8
GRK average driving time forward (sec.): 2.6
GRK total driving time reverse (sec.): 9.0
GRK average driving time reverse (sec.): 1.8

The DCF845 yielded some of the fastest results in our GRK driving speed tests. Dewalt designed the DCF845 with the right balance of features for excellent driving performance without the downsides, such as short battery life, that plague some high-end impact drivers.

The DCF845 is equally capable of driving more than just long GRK screws. We tested driving lag bolts, structural screws, drywall screws, and other standard sizes and lengths. This impact driver handled all with ease for nearly unmatched driving versatility.

Compare driving speed test results

Torque

Milwaukee 2953-20 Torquemeter
Milwaukee 2953-20 Torque Charts

Max torque drive mode 1 (in-lbs): 1,236.0
Max torque drive mode 2 (in-lbs): 857.4
Max torque drive mode 3 (in-lbs): 390.6
Max torque drive mode 4 (in-lbs): N/A

The 2953-20 is a torque beast, generating the highest torque output we measured among the best impact drivers in our test fleet. It did so by a long shot as well, which is impressive in such a compact and agile footprint.

The torque output isn’t surprising since this is Milwaukee’s flagship gen-4 impact driver that’s designed for brute force over all else. The performance is even more impressive knowing the robust torque profile doesn’t come at the expense of slow driving performance. The 2953-20 shines at both, partly explaining its high price tag and why many pros carry it in their tool belt.

Compare torque test results

Torque

Dewalt DCF845 Torquemeter
Dewalt DCF845 Torque Charts

Max torque drive mode 1 (in-lbs): 612.6
Max torque drive mode 2 (in-lbs): 396.6
Max torque drive mode 3 (in-lbs): N/A
Max torque drive mode 4 (in-lbs): N/A

While the DCF845 sped through heavy-duty driving jobs in our tests, the torque output doesn’t explain most of the driving performance. The DCF845 is moderately powerful compared to impact drivers in the Dewalt lineup and outside of it. It is sufficiently powerful to handle demanding tasks, but the Dewalt 20V Max XR DCF887 has a far higher torque output for models in the Dewalt ecosystem.

Compare torque test results

Battery run time

Power type: Cordless
Battery run time (min.): 26.0
Battery tested: 18V Red Lithium CP 2Ah (48-11-1820)
Voltage: 18

The 2953-20 had underwhelming no-load run time performance in our test, the primary letdown we came across.We tested battery run time with the 2Ah battery version. With a Milwaukee M18 Red Lithium XC 5Ah battery, expect the battery run time to continue underperforming competing models running the same Ah setup. However, run time is significantly improved over the 2Ah battery.

At the same time, we recognize the limitations of our run-time tests that don’t currently test battery performance under load. Once testing the battery performance under load, we’ll update this review.

Compare battery test results

Battery run time

Power type: Cordless
Battery run time (min.): 49.0
Battery tested: 20V Max 2Ah (DCB203)
Voltage: 20

The DCF845 is among the best-performing heavy-duty impact drivers we’ve tested, with 49.0 minutes of no-load run time. Adding a 5Ah battery should result in outstanding run time, though we didn’t test the run time with this setup.

We tested battery run time with the 2Ah battery version. With a 20V Max XR 5Ah battery, expect the battery run time to continue outperforming competing models running the same Ah setup.

Compare battery test results

Battery lineup

Milwaukee M18 Battery Lineup

Milwaukee offers 1.5Ah, 2Ah, 3Ah, 4Ah, 5Ah, 6Ah, 8Ah, and 12Ah batteries in its M18 lineup. Upgrading to the higher Ah options increases battery run time and improves driving performance, though we’ve not tested all of these batteries to understand the cost tradeoffs.

Having at least two batteries in your setup is best so you don’t miss a beat when draining one battery. We recommend buying a Milwaukee M18 Red Lithium CP 2Ah and a Milwaukee M18 Red Lithium XC 5Ah battery for most M18 impact driver setups for a good performance, price, and size balance.

Many Milwaukee impact drivers come in kits with chargers that charge multiple voltage batteries in one, conveniently saving space in your shop if you have several M12 and M18 ecosystem tools.

Battery lineup

Dewalt 20V Max Battery Lineup

Dewalt offers 1.5Ah, 2Ah, 3Ah, 4Ah, 5Ah, 8Ah, 10Ah, and 12Ah batteries in its Max 20V lineup. Upgrading to the higher Ah options increases battery run time and improves driving performance, though we’ve not tested all of these batteries to understand the cost tradeoffs.

Having at least two batteries in your setup is best so you don’t miss a beat when draining one battery. We recommend buying a Dewalt 20V Max 2Ah and a Dewalt 20V Max XR 5Ah battery for most Dewalt 20V impact driver setups for a good performance, price, and size balance.

Dewalt’s new Powerstack batteries may be a smart buying choice for some users. Dewalt advertises improved driving performance, battery run time, and more battery cycles out of its 1.7Ah and 5Ah batteries which are incredibly compact compared to equivalent Max XR models. We plan on testing the performance differences to understand if the jump in price is worth it for most people.

Many Dewalt impact drivers come in kits with a hybrid 12V and 20V charger in one, which conveniently saves space in your shop if you have multiple tools in the ecosystem.

Charging time

Milwaukee M18 Fuel Gauge

Charger tested: Milwaukee M12 & M18 Multi-Volt (48-59-1812)
Charging time 2Ah battery (min.): 41.0
Charging time 2.5Ah battery (min.): Not tested
Charging time 4Ah battery (min.): Not tested
Charging time 5Ah battery (min.): 98.0
Charging time per Ah (min.): 20.1
Fuel gauge: On battery

The Milwaukee M12 and M18 multi-volt charger (model 48-59-1812) included in most kits is reasonably fast at charging batteries, including to beat out team red’s most frequent adversary, Dewalt. It takes 41 minutes to charge an M18 2Ah battery and 98 minutes for a 5Ah battery, or approximately 20 minutes per amp-hour.

Milwaukee’s 48-59-1812 charger charges multiple battery voltages in one, conveniently saving space in your shop if you have several M12 and M18 ecosystem tools.

Compare charging test results

Charging time

Dewalt 20V Fuel Gauge

Charger tested: Dewalt 20V Max (DCB115)
Charging time 2Ah battery (min.): 59.0
Charging time 2.5Ah battery (min.): Not tested
Charging time 4Ah battery (min.): Not tested
Charging time 5Ah battery (min.): 139.0
Charging time per Ah (min.): 28.7
Fuel gauge: On battery

The Dewalt charger that is standard in most kits (model DCB115) isn’t as fast as chargers from other brands. In our tests, it took 59.0 minutes to top off a Max 2Ah battery and 139.0 minutes to charge a Max XR 5Ah battery. Expect that this charger will charge batteries at approximately 28.7 minutes per Ah. Faster chargers charge batteries at 20.0 or fewer minutes per Ah.

Nicely, the DCD112 works with Dewalt’s 12V and 20V platform batteries, conveniently saving space in your shop if you have several tools in the Dewalt ecosystem.

Compare charging test results

RPM

Milwaukee 2953-20 RPM Charts

Max RPM drive mode 1 (fwd.): 3,788.0
Max RPM drive mode 2 (fwd.): 2,874.0
Max RPM drive mode 3 (fwd.): 1,427.0
Max RPM drive mode 4 (fwd.): 3,334.0
Max RPM drive mode 1 (rev.): 3,735.0
Max RPM drive mode 2 (rev.): 2,905.0
Max RPM drive mode 3 (rev.): 1,560.0
Max RPM drive mode 4 (rev.): 3,177.0

The 2953-20’s impressive driving performance is also a result of its RPM profile. The max RPM confidently drives screws and lag bolts quickly, albeit risking cam-out in the highest speed setting.

There is no meaningful RPM difference in forward or reverse. Some impact drivers increase RPM in the reverse direction for specialty drive modes to power through loosening stubborn nuts and deeply embedded screws.

Compare RPM test results

RPM

Dewalt DCF845 RPM Charts

Max RPM drive mode 1 (fwd.): 3,214.0
Max RPM drive mode 2 (fwd.): 2,711.0
Max RPM drive mode 3 (fwd.): 1,437.0
Max RPM drive mode 4 (fwd.): N/A
Max RPM drive mode 1 (rev.): 3,290.0
Max RPM drive mode 2 (rev.): 2,555.0
Max RPM drive mode 3 (rev.): 1,465.0
Max RPM drive mode 4 (rev.): N/A

We appreciate that Dewalt didn’t design the DCF845 with an absurdly high RPM just to impress users with its on-paper performance. RPM does help drive screws fast, but torque does more to explain overall driving performance. An impact driver that ramps immediately to a high RPM results in frequent cam-out and stripping screws.

None of these are issues with the DCF845 with its moderate RPM readouts. There is also no noticeable RPM difference between forward and reverse in all three drive modes. Some Makita impact drivers include specialty driving modes with different forward and reverse RPMs for a given drive setting.

Compare RPM test results

Driving clearance

Min. interior width clearance (in.): 7.375
Min. top edge clearance (in.): 1.250
Min. interior 45-deg. clearance (in.): 5.750

The 2953-20 performed well in our clearance tests, especially for such a powerful impact driver. It impressed most in our interior 45-degree and width tests, finishing near the top of the pack, making it a solid all-around choice to squeeze into tight spaces.

Compare driving clearance test results

Driving clearance

Min. interior width clearance (in.): 7.750
Min. top edge clearance (in.): 1.250
Min. interior 45-deg. clearance (in.): 6.500

While the DCF845 casts a thin shadow viewed from the front, it didn’t shine in our interior clearance tests, which is somewhat expected for a heavier-duty impact driver. The primary reason is the long collet-to-back length. Otherwise, the footprint resembles many competing impact drivers with similar average results in our clearance tests.

Compare driving clearance test results

Noise

2953-20 Impact Driver Noise Chart

Max noise no load (dBA): 86.4
Max impacting noise (dBA): 95.2

No impact driver peacefully says hello when impacting. But the 2953-20 is quieter than many other models when impacting.

Jump to Milwaukee’s Fuel Surge lineup for best-in-class noise performance, albeit lower torque. The Milwaukee M12 Fuel Surge 2551-20 and Milwaukee M18 Fuel Surge 2760-20 are hydraulic impact drivers with quieter impacts.

Compare noise test results

Noise

DCF845 Impact Driver Noise Chart

Max noise no load (dBA): 78.8
Max impacting noise (dBA): 97.4

No impact driver whispers while impacting, including the DCF845, a moderately loud impact driver that can damage your ears with prolonged exposure. You can shave off a few decibels of impact noise performance with the Milwaukee M18 Fuel 2953-20, but you’ll need to switch up impact driver classes to markedly improved noise performance.

The Milwaukee M12 Fuel Surge 2551-20 and Milwaukee M18 Fuel Surge 2760-20 are hydraulic impact drivers with more subtle impacts, albeit lower torque.

Compare noise test results

Vibration

Max head vibration no load (m/s2): 26.4
Max grip vibration no load (m/s2): 1.9

Compare vibration test results

Vibration

Max head vibration no load (m/s2): 32.9
Max grip vibration no load (m/s2): 2.9

Compare vibration test results

Light

Milwaukee 2953-20 Light
Milwaukee 29530-20 Light Closeup

Light: Yes
Light on/off: No
Number of lights: 3
Light time delay (sec.): 9.0

The work light illuminates a moderately large work area. The work light can’t be disabled and doesn’t act as a dedicated flashlight. Several Makita impact drivers include a dedicated flashlight functionally with the forward/reverse switch set to neutral.

Light

Dewalt DCF845 Light
Dewalt DCF845 Light Closeup

Light: Yes
Light on/off: No
Number of lights: 3
Light time delay (sec.): 20.0

The DCF845’s work light illuminates a moderately large and bright surface area that is focused in the correct location. One minor head-scratcher is Dewalt’s choice of a 20-second time delay for the light, which is unnecessarily long and drains battery life.

There is no dedicated flashlight mode, one featured included with some Makita impact drivers, where the trigger acts as an on/off button to turn on the light without moving the motor. You also can’t disable the light.

Collet

Milwaukee 2953-20 Collet Closeup

Collet size: 1/4-inch hex
Quick-change collet: Yes
Bit-eject collet: No
Easy-insert collet: Yes

Milwaukee rarely includes a bit-eject feature on its impact drivers, but some models have an incredibly smooth easy-insert design, both of which are true with the 2953-20.

Many Dewalt impact drivers include easy-insert and bit-eject collets that are smooth with the best collet design we’ve come across.

Collet

Dewalt DCF845 Collet Closeup

Collet size: 1/4-inch hex
Quick-change collet: Yes
Bit-eject collet: Yes
Easy-insert collet: Yes

The DCF845 is excellent for one-handed bit changes. There is an easy-insert feature that doesn’t require sliding the collet forward to accept a bit. A bit-eject feature also lightly ejects the bit when sliding the collet forward.

Dewalt’s collet design is better executed than other brands offering similar features. The easy-insert mechanism is smooth for simple operation, and the bit-eject feature doesn’t jettison the bit too hard to potentially miss catching the bit.

App integration

App integration: None

There is no bluetooth app integration to review impact driver diagnostics or to customize driving profiles on your phone. Some high-end Milwaukee impact drivers come in a One-Key version which includes an app integration to track impact driver usage, displays tool diagnostics, and allows you to set custom driving profiles, such as adjusting the RPM for each drive mode.

App integration

App integration: None

There is no out-of-the-box bluetooth app integration to review impact driver diagnostics or to customize driving profiles on your phone.

Dewalt models like the high end Dewalt 20V Max XR DCF888 come in a ToolConnect version which includes an app integration to track impact driver usage, displays tool diagnostics, and allows you to set custom driving profiles, such as adjusting the RPM for each drive mode.

However, the DCF845 includes an expansion slot in the base where ToolConnect connectivity can be added when buying Dewalt’s after-market chip.

Warranty

Tool warranty (years): 5
Battery warranty (years): 2-3 (depends on model)

Milwaukee stands behind the durability of its impact drivers with exceptionally-long warranties. The 2953-20 has a five-year warranty, which is among the longest offered by any manufacturer. Milwaukee’s M18 Red Lithium CP 2Ah batteries include a two-year warranty and the M18 Red Lithium XC 5Ah batteries include a three-year warranty.

Warranty

Tool warranty (years): 3
Battery warranty (years): 3

Dewalt stands behind the durability of its impact drivers with exceptionally-long warranties. The DCF845 has a three-year warranty. Dewalt 20V batteries include a two-year warranty.

Dewalt also offers free maintenance and replacement of worn parts for one year for the DCF845 and three years for its 20V batteries.

Nathan Hamilton
Nathan Hamilton
Nathan Hamilton is the founder of DIY Gear Reviews and a recognized expert in the home and DIY space. He has over 200 bylines covering topics such as power tools, hand tools, and woodworking. Nathan is the strategic director for DIY Gear Reviews, deciding everything from the content covered to designing the testing methodologies for lab-tested reviews. He can be emailed at nhamilton@diygearreviews.com.

Related

Leave a Comment