Ryobi 18V One+ P237 Vs Ryobi 18V One+ PBLID02

Ryobi P237 Angle 5

Ryobi P237

Quick take

The Ryobi 18V One+ PBLID02 is a better overall impact driver than the Ryobi 18V One+ P237. The PBLID02 is much more compact and offers better speed under load and more torque. While the P237 has three drive modes, the PBLID02 offers four for added versatility. The primary reason to opt for the P237 is the much lower price. If doing so, consider that the P237 is incredibly long from tip to tail.

Brand Ryobi
Platform 18V One+
Motor Brushed
Tested torque in-lbs 495.6
IPM 3,200.0
Drive modes 3
Collet 1/4-inch hex
Same as -
Brand Ryobi
Platform 18V One+
Motor Brushless
Tested torque in-lbs 609.0
IPM 4,000.0
Drive modes 4
Collet 1/4-inch hex
Same as PBLID02B

Editorial opinion

Rating

3.92 / 5 ⭐️’s

Methodology used: Heavy duty

Pros

  • Driving modes improve versatility
  • Exceptional battery run time
  • Smooth driving experience when impacting
  • One-handed bit changes

Cons

  • Large footprint
  • Heavy
  • Brushed motor
  • Short battery warranty

Rating

4.11 / 5 ⭐️’s

Methodology used: Heavy duty

Pros

  • Exceptional driving speed
  • Several drive modes improve versatility
  • Brushless motor
  • Easy-insert collet

Cons

  • Battery run time
  • Footprint is bulky
  • Heavy

Global rankings

21 models tested

TestResultRank
Driving speed (sec.)18.411
Torque (in-lbs)495.617
Battery run time (min.)48.06
RPM3,079.011
Bare weight (lbs)2.6621
Impacting noise (dBA)96.13
TestResultRank
Driving speed (sec.)14.75
Torque (in-lbs)609.012
Battery run time (min.)30.015
RPM2,966.013
Bare weight (lbs)2.3218
Impacting noise (dBA)96.94

Kit and bare tool options

Lab results

Design & ergonomics

Stands upright w/o battery: Yes
Stands upright w/ battery: Yes
Grip material: Rubber overgrip
Magnetic holder: Yes
Bit holder: Yes
Belt hook: Yes
Handle angle (deg.): 77.5
Head angle (deg.): 90.0

The P237 is a bulky impact driver with an aggressive forward lean and long tip that provide solid reach. Most of the grip is covered in a rubber overmold, except for several angular, thin cutouts included for aesthetic purposes.

On the base, there is a magnetic fastener plate and a bit holder. Most other impact drivers rarely build these features into the design, though more should. Otherwise, a belt hook is mountable on either side of the base.

Design & ergonomics

Stands upright w/o battery: Yes
Stands upright w/ battery: Yes
Grip material: Rubber overgrip
Magnetic holder: No
Bit holder: No
Belt hook: Yes
Handle angle (deg.): 80.0
Head angle (deg.): 90.0

The PBLID02 is moderately bulky throughout with a slight forward-leaning angle that provides solid reach. The grip is entirely covered in a rubber overmold, improving shock absorption.

The included belt hook is mountable on either side, and a lanyard can be attached to the back. However, the PBLID02 doesn’t have a magnetic plate to hold fasteners or a bit holder, two features that some Ryobi impact drivers have for added convenience.

Weight

Ryobi P237 On Scale

Bare weight (lbs): 2.66
Weight w/ 2Ah battery (lbs): 3.62
Weight w/ 2.5Ah battery (lbs):  Not tested
Weight w/ 4Ah battery (lbs): 4.30
Weight w/ 5Ah battery (lbs): Not tested

Don’t buy the P237 if you want a lightweight impact driver that won’t fatigue your arm and hand over long driving sessions. It is one of the heaviest models we’ve tested in its bare tool form and with a battery. We found throughout testing that our hands tired quickly, continually trying to hold the P237 upright due to the heavy, forward-balanced design.

Consider that the working weight can differ significantly depending on the battery run in your setup, which is why we tested the weight in different configurations. To keep it as lightweight as possible, we recommend combining the P237 with Ryobi’s 18V One+ 2Ah battery for a good balance of performance and weight.

If weight is less of a concern, pair the P237 with Ryobi’s 18V One+ 4Ah battery for a longer run time and improved driving performance.

Compare weight test results

Weight

Ryobi PBLID02 On Scale

Bare weight (lbs): 2.32
Weight w/ 2Ah battery (lbs): 3.28
Weight w/ 2.5Ah battery (lbs):  Not tested
Weight w/ 4Ah battery (lbs): 3.96
Weight w/ 5Ah battery (lbs): Not tested

The PBLID02 is a heavy impact driver, so it’s not ideal for long driving sessions where arm fatigue sets in.

The working weight can differ significantly depending on the battery run in your setup, which is why we tested the weight in different configurations. To keep it lightweight, we recommend combining the PBLID02 with Ryobi’s 18V One+ 2Ah battery for a good balance of performance and weight.

If weight is less of a concern, pair the PBLID02 with Ryobi’s 18V One+ 4Ah battery for a longer run time and improved driving performance.The Makita 18V LXT XDT13Z or Makita 18V LXT XDT14Z are solid alternatives that are comparably-priced impact drivers and far lighter.

Compare weight test results

Footprint

Ryobi P237 Footprint1
Ryobi P237 Footprint2

Max height (bare tool, in.): 7.375
Max width (bare tool, in.): 3.250
Collet to back length (in.): 7.000
Base length (bare tool, in.): 5.125
Base width (bare tool, in.): 3.250
Trigger circumference (in.): 6.375
Handle circumference (in.): 5.250

Some of the weight is a result of the bulky footprint. The P237 is massive from tip to back compared to nearly all other impact drivers in our test fleet. Ryobi has standardized the base sizing for its impact drivers, and unfortunately, the bases are also comparably bulky.

The Makita 18V LXT XDT13Z is worth considering if you’re not wedded to the Ryobi ecosystem. The Makita model is far smaller and lighter.

Compare footprint test results

Footprint

Ryobi PBLID02 Footprint1
Ryobi PBLID02 Footprint2

Max height (bare tool, in.): 7.500
Max width (bare tool, in.): 3.000
Collet to back length (in.): 5.625
Base length (bare tool, in.): 5.125
Base width (bare tool, in.): 3.000
Trigger circumference (in.): 6.500
Handle circumference (in.): 5.250

Most Ryobi impact drivers have a bulky footprint, and that’s no different with the PBLID02. Notably, the base is more prominent than many similarly-priced impact drivers.

Context is important when discussing the length. The collet-to-back length isn’t as oversized as many Ryobi models that are incredibly large, though it’s not as compact as impact drivers from other brands.

So, the PBLID02 better reaches into tight spaces than other Ryobi models but doesn’t match the clearances possible looking to other brands, as demonstrated in our interior clearance tests below.

Compare footprint test results

Motor

Motor: Brushed
Impacts per minute: 3,200.0

Ryobi built the P237 with a brushed motor to hit such a low price point. While brushed motors can powerfully and quickly drive screws, they are less durable and less efficient than their brushless counterparts.

If your budget can support it, we recommend jumping up in price to a model with a brushless motor, such as the Ryobi 18V One+ PBLID02, if sticking with a Ryobi impact driver.

One reason why the P237 didn’t secure a podium position in any of our driving tests is its low 3200.0 advertised impacts per minute. Increasing the impacts per minute would help the P237 to achieve faster driving time in heavy-duty tasks, including our driving speed tests.

Motor

Motor: Brushless
Impacts per minute: 4,000.0

One standout feature of the PBLID02 is that it includes a brushless motor. Brushless motors are more efficient and durable and provide better battery run time than brushed motors.

The brushless motor and the high 4000.0 impacts per minute partly explain why the PBLID02 shined in our driving speed tests.

Drive modes

Ryobi P237 Drive Modes

Drive modes: 3
Drive mode 1:  High speed 
Drive mode 2:  Medium speed 
Drive mode 3:  Low speed 
Drive mode 4:  N/A 
Variable speed trigger: Yes

The key standout feature for would-be P237 owners is that it’s one of the rare impact drivers at this price point to include several drive modes. Arguably, having access to several drive modes is more critical for homeowners wanting a versatile all-in-one tool than a higher torque or RPM output.

Drive mode 1 is the highest speed setting and is ideal for heavy-duty tasks, such as driving decking screws and lag bolts. This mode provides the highest torque and RPM output. Drive mode 1 didn’t consistently and accurately finish screws in our tests.

An accurate screw finish is where drive mode 2 is most helpful. We favored drive mode 2 over drive mode 3 for recessing screw heads since the lowest setting is underpowered for most tasks.

Drive mode 1 most accurately drove screws in low-density materials like drywall. But consider that drive mode 2 is faster and still accurate.

Drive modes

Drive modes: 4
Drive mode 1:  High speed 
Drive mode 2:  Medium speed 
Drive mode 3:  Low speed 
Drive mode 4:  Assist 
Variable speed trigger: Yes

There are four drive modes on the PBLID02, significantly improving its driving versatility. Drive mode 1 offers the highest torque and RPM output and is ideal for rapidly driving lag bolts, decking screws, and other big fasteners.

Drive mode 2 still offers solid driving performance but is better suited to driving shorter screws into dimensional lumber and soft materials such as MDF. We could recess screws in all material densities in drive mode 2, though not at a consistent depth.

Drive mode 3 most accurately recesses screws and is the best setting if demanding a consistently perfect recess. For light and medium-duty jobs, we found a sweet spot of using drive mode 3 or 2 to drive screws quickly, then switching over to drive mode 3 for a consistent recess.

The PBLID02 also includes an assist mode, though we didn’t find it any better than the other drive modes in the forward setting. However, the assist mode is helpful in the reverse setting to bust loose stubborn screws and nuts. When holding the trigger, the collet starts and stops several times and then ramps up the RPM. This assist setting nicely helped to avoid stripping screw heads.

There are no other specialty drive modes that high-end impact drivers include, such as self-tapping, wood, and bolt-loosening drive modes. Several Milwaukee impact drivers have self-tapping options, and some Makita impact drivers include specialty wood and bolt-loosening modes.

Driving speed

GRK total driving time forward (sec.): 18.4
GRK average driving time forward (sec.): 3.7
GRK total driving time reverse (sec.): 15.0
GRK average driving time reverse (sec.): 3.0

The P237 won’t win any driving speed contests, but that’s expected in this price category. However, it drove GRK structural screws reasonably fast in our heavy-duty driving speed tests, primarily due to its RPM output.

Throughout our testing, we were also impressed with the speed in light and medium-duty tasks, such as driving 3-inch and shorter screws into plywood and dimensional lumber.

Compare driving speed test results

Driving speed

GRK total driving time forward (sec.): 14.7
GRK average driving time forward (sec.): 2.9
GRK total driving time reverse (sec.): 11.0
GRK average driving time reverse (sec.): 2.2

While it doesn’t have the highest torque or RPMs, the PBLID02 performed well in our driving speed tests, finishing near the top of the pack driving GRK RSS screws. The PBLID02 similarly shines at driving decking screws and shorter common screw sizes used in DIY projects and medium-duty tasks around the home.

Compare driving speed test results

Torque

Ryobi P237 Torquemeter
Ryobi P237 Torque Charts

Max torque drive mode 1 (in-lbs): 495.6
Max torque drive mode 2 (in-lbs): 311.4
Max torque drive mode 3 (in-lbs): 159.6
Max torque drive mode 4 (in-lbs): N/A

The P237 doesn’t generate high torque output. But that’s not a downside for its intended audience of homeowners coveting versatility. The P237 is sufficiently powerful to handle any demanding task around the home.

All budget impact drivers make sacrifices. Ryobi made the right call to sacrifice torque in favor of including several drive modes. Homeowners are better off with driving versatility than brute force power.

Compare torque test results

Torque

Ryobi PBLID02Torquemeter
Ryobi PBLID02 Torque Charts

Max torque drive mode 1 (in-lbs): 609.0
Max torque drive mode 2 (in-lbs): 457.2
Max torque drive mode 3 (in-lbs): 284.4
Max torque drive mode 4 (in-lbs): N/A

The PBLID02 is moderately powerful, as our torque tests demonstrated. In practice, we didn’t encounter a driving task the PBLID02 couldn’t complete, including driving long and big lag bolts into treated lumber. This impact driver doesn’t offer high RPMs, leaving its torque output to do most of the heavy lifting in demanding tasks.

Several closely-priced alternatives offer higher torque output, including the Milwaukee M18 Fuel 2953-20, Dewalt 20V Max XR DCF887, and Dewalt 20V Max XR DCF845.

Compare torque test results

Battery run time

Power type: Cordless
Battery run time (min.): 48.0
Battery tested: 18V One+ High Performance 2Ah (PBP003)
Voltage: 18

The P237 has an exceptionally long battery life, as evidenced by its impressive performance in our no-load run-time tests. In subsequent rounds of testing, we will be running our test fleet through run-time tests under load. We’ll update this review with those results.

We tested battery run time with the 2Ah battery version. With an 18V One+ 4Ah battery, expect the battery run time to continue outperforming competing models running the same Ah setup.

Compare battery test results

Battery run time

Power type: Cordless
Battery run time (min.): 30.0
Battery tested: 18V One+ High Performance 2Ah (PBP003)
Voltage: 18

One letdown of the PBLID02 was its battery run time in our testing. Several cheaper Ryobi impact drivers offer better run times. But consider that the tested no-load run time of 30 minutes is still long enough for most jobs around the home.

We tested battery run time with the 2Ah battery version. With an 18V One+ 4Ah or 6Ah battery, expect the battery run time to continue underperforming competing models running the same Ah setup, albeit run time increases significantly.

Compare battery test results

Battery lineup

Ryobi 18V One+ Battery Lineup

Ryobi offers 1.5Ah, 2Ah, 4Ah, 6Ah, 8Ah, and 12Ah batteries in its 18V One+ lineup, and some versions come in a standard or high-performance model. Upgrading to the higher Ah options increases battery run time and improves driving performance, though we’ve not tested all of these batteries to understand the cost tradeoffs.

Having at least two batteries in your setup is best so you don’t miss a beat when draining one battery. We recommend buying a Ryobi 18V One+ High Performance 2Ah and a Ryobi 18V One+ High Performance 4Ah battery for most 18V One+ impact driver setups for a good performance, price, and size balance.

Battery lineup

Ryobi 18V One+ Battery Lineup

Ryobi offers 1.5Ah, 2Ah, 4Ah, 6Ah, 8Ah, and 12Ah batteries in its 18V One+ lineup, and some versions come in a standard or high-performance model. Upgrading to the higher Ah options increases battery run time and improves driving performance, though we’ve not tested all of these batteries to understand the cost tradeoffs.

Having at least two batteries in your setup is best so you don’t miss a beat when draining one battery. We recommend buying a Ryobi 18V One+ High Performance 2Ah and a Ryobi 18V One+ High Performance 4Ah battery for most 18V One+ impact driver setups for a good balance of performance, price, and size.

Charging time

Ryobi 18V Fuel Gauge

Charger tested: Ryobi 18V One+ (PCG002)
Charging time 2Ah battery (min.): 49.0
Charging time 2.5Ah battery (min.): Not tested
Charging time 4Ah battery (min.): 117.0
Charging time 5Ah battery (min.): Not tested
Charging time per Ah (min.): 26.9
Fuel gauge: On battery

The 18V charger included with most Ryobi kits (model PCG002) charges batteries moderately slower than other brands.

Our tests took 49.0 and 117.0 minutes to charge a Ryobi 18V One+ 2Ah and 4Ah battery, respectively. Several other brands we’ve tested take approximately 20 minutes per Ah, whereas the Ryobi charger takes at least 24.5 minutes per Ah.

Compare charging test results

Charging time

Ryobi 18V Fuel Gauge

Charger tested: Ryobi 18V One+ (PCG002)
Charging time 2Ah battery (min.): 49.0
Charging time 2.5Ah battery (min.): Not tested
Charging time 4Ah battery (min.): 117.0
Charging time 5Ah battery (min.): Not tested
Charging time per Ah (min.): 26.9
Fuel gauge: On battery

The 18V charger included with most Ryobi kits (model PCG002) charges batteries moderately slower than other brands.

Our tests took 49.0 and 117.0 minutes to charge a Ryobi 18V One+ 2Ah and 4Ah battery, respectively. Several other brands we’ve tested take approximately 20 minutes per Ah, whereas the Ryobi charger takes at least 24.5 minutes per Ah.

Compare charging test results

RPM

Ryobi P237 RPM Charts

Max RPM drive mode 1 (fwd.): 3,079.0
Max RPM drive mode 2 (fwd.): 2,180.0
Max RPM drive mode 3 (fwd.): 1,469.0
Max RPM drive mode 4 (fwd.): N/A
Max RPM drive mode 1 (rev.): 2,464.0
Max RPM drive mode 2 (rev.): 2,134.0
Max RPM drive mode 3 (rev.): 1,496.0
Max RPM drive mode 4 (rev.): N/A

The P237 has average RPM output for an 18V impact driver. The RPM profile is balanced well for the intended user, who doesn’t demand best-in-class driving speed over all else.

The RPM profile also makes setting screws easier. Impact drivers that ramp quickly to a high RPM tend to spin out screws before settling into the workpiece. The P237’s RPM profile also helps to reduce cam-out and stripped threads.

One data point that is worth considering is the P237’s highest speed setting generates far higher RPM output in forward than in reverse. The lower RPM in reverse reduces the potential for cam-out when removing screws, albeit slowing down the removal process.

Compare RPM test results

RPM

Ryobi PBLID02 RPM Charts

Max RPM drive mode 1 (fwd.): 2,966.0
Max RPM drive mode 2 (fwd.): 1,832.0
Max RPM drive mode 3 (fwd.): 915.0
Max RPM drive mode 4 (fwd.): 1,058.0
Max RPM drive mode 1 (rev.): 2,969.0
Max RPM drive mode 2 (rev.): 1,935.0
Max RPM drive mode 3 (rev.): 931.0
Max RPM drive mode 4 (rev.): 1,940.0

The PBLID02 generated middle-of-the-pack max RPM on our contact tachometer. However, the performance on paper undersells its driving performance. Impact drivers with similar RPM and torque profiles couldn’t match the PBLID02’s results in our heavy-duty driving speed tests.

The three speed modes have no significant RPM difference between forward and reverse. But the assist mode offers a vastly different RPM profile depending on the forward or reverse setting selected. The assist mode in reverse nearly doubles the RPM output compared to the forward setting to quickly remove screws from your work material after the start and stop mechanism completes its cycle.

Compare RPM test results

Driving clearance

Min. interior width clearance (in.): 9.625
Min. top edge clearance (in.): 1.125
Min. interior 45-deg. clearance (in.): 7.250

The P237 is incredibly bulky. We don’t recommend this impact driver if you consistently drive fasteners in tight spaces. The collet-to-back length is among the longest we’ve seen.

A sub-compact or smaller footprint compact impact driver can squeeze into tighter spaces, especially if designed with a shorter collet-to-back length.

Compare driving clearance test results

Driving clearance

Min. interior width clearance (in.): 8.250
Min. top edge clearance (in.): 1.250
Min. interior 45-deg. clearance (in.): 6.500

We don’t recommend the PBLID02 if you consistently drive fasteners in tight spaces. A sub-compact or smaller-footprint compact impact driver can squeeze into tighter spaces.

The long collet-to-back length and extensive base limit the tight spaces it can fit into and the restricted areas it can fit through.

Compare driving clearance test results

Noise

P237 Impact Driver Noise Chart

Max noise no load (dBA): 83.5
Max impacting noise (dBA): 96.1

The P237 is incredibly quiet when impacting compared to most impact drivers in our test fleet, including much pricier options.

The Milwaukee M12 Fuel Surge 2551-20 and Milwaukee M18 Fuel Surge 2760-20 are other options to consider for impressive noise output. Both are hydraulic impact drivers with far quieter impacts.

Compare noise test results

Noise

PBLID02 Impact Driver Noise Chart

Max noise no load (dBA): 86.1
Max impacting noise (dBA): 96.9

The PBLID02’s noise profile is a tale of two stories. When impacting, it is one of the quieter impact drivers we’ve tested, though all impact drivers are loud. The PBLID02 is one of the louder impact drivers when not under load. In practice, paying attention to the noise output when impacting is more critical.

The Milwaukee M12 Fuel Surge 2551-20 and Milwaukee M18 Fuel Surge 2760-20 are other options to consider. Both are hydraulic impact drivers with far quieter impacts.

Compare noise test results

Vibration

Max head vibration no load (m/s2): 75.1
Max grip vibration no load (m/s2): 2.1

We expected the P237 to be uncomfortable to use when impacting. However, it was one of our test fleet’s least violent and most comfortable impact drivers. The rubber overmold on the grip absorbs vibrations well, improving upon the already much smoother and less violent impacting mechanism.

Compare vibration test results

Vibration

Max head vibration no load (m/s2): 88.2
Max grip vibration no load (m/s2): 3.1

Compare vibration test results

Light

Ryobi P237 Light
Ryobi P237 Light Closeup

Light: Yes
Light on/off: No
Number of lights: 3
Light time delay (sec.): 10.0

We appreciate that the P237 has the work light built into the tip and points directly in front of the nose, unlike many other Ryobi impact drivers that build the work light into the base and shine the light upwards, sometimes not focusing the light in the right area.

There is no dedicated flashlight feature or the ability to disable the light, unlike some Makita impact drivers that include these features.

Light

Ryobi PBLID02 Light
Ryobi PBLID02 Light Closeup

Light: Yes
Light on/off: No
Number of lights: 1
Light time delay (sec.): 15.0

We’re not huge fans of the PBLID02’s work light, though it does the job in some scenarios. The light is set into the base and shines upward, whereas other models include the light around the collet and point it straight forward. The latter design approach centers the light directly where you’re driving screws.

When driving long screws with the impact driver further away from the work material, we found the PBLID02’s light was centered slightly above the screw being driven. This outcome was only an issue when driving 3-inch and longer screws.

There is no dedicated flashlight feature or the ability to disable the work light, which could minimally improve battery performance.

Collet

Ryobi P237 Collet Closeup

Collet size: 1/4-inch hex
Quick-change collet: Yes
Bit-eject collet: Yes
Easy-insert collet: Yes

One-handed bit changes are easy with the P237, thanks to the easy-insert and bit-eject mechanisms built into the collet. The bit-eject mechanism jettisons bits more powerfully than other impact drivers, sometimes resulting in not catching the bits. But after a few rounds of usage, catching the bit is easy and isn’t an issue.

Collet

Ryobi PBLID02 Collet Closeup

Collet size: 1/4-inch hex
Quick-change collet: Yes
Bit-eject collet: Yes
Easy-insert collet: Yes

The PBOID02 includes an easy insert collet that is a breeze to insert bits with one hand, great for convenience. A bit-eject collet is also included, although the jettison force may be slightly overpowered for some tastes. We found ourselves jettisoning the bit and frequently missing catching it. But after a few rounds of usage, catching the bit is easy and isn’t an issue.

App integration

App integration: None

There is no bluetooth app integration to review impact driver diagnostics or to customize driving profiles. Dewalt’s ToolConnect and Milwaukee’s One Key models offer app integrations that track impact driver usage, display tool diagnostics, and allow you to set custom driving profiles, such as adjusting the RPM for each drive mode.

App integration

App integration: None

There is no bluetooth app integration to review impact driver diagnostics or to customize driving profiles. Dewalt’s ToolConnect and Milwaukee’s One Key models offer app integrations that track impact driver usage, display tool diagnostics, and allow you to set custom driving profiles, such as adjusting the RPM for each drive mode.

Warranty

Tool warranty (years): 3
Battery warranty (years): 90 day

Ryobi offers an exceptionally-long three-year warranty on its impact drivers. However, Ryobi’s battery warranties don’t come close to matching the length provided by most other manufacturers. Ryobi has a 90-day battery warranty, whereas other manufacturers commonly offer two to three years of coverage.

Warranty

Tool warranty (years): 3
Battery warranty (years): 90 day

Ryobi offers an exceptionally-long three-year warranty on its impact drivers. However, Ryobi’s battery warranties don’t come close to matching the length provided by most other manufacturers. Ryobi has a 90-day battery warranty, whereas other manufacturers commonly offer two to three years of coverage.

Nathan Hamilton
Nathan Hamilton
Nathan Hamilton is the founder of DIY Gear Reviews and a recognized expert in the home and DIY space. He has over 200 bylines covering topics such as power tools, hand tools, and woodworking. Nathan is the strategic director for DIY Gear Reviews, deciding everything from the content covered to designing the testing methodologies for lab-tested reviews. He can be emailed at nhamilton@diygearreviews.com.

Related

Leave a Comment