Ryobi 18V One+ PBLID02 Vs Makita 18V LXT XDT19Z

Ryobi PBLID02 Angle 5

Ryobi PBLID02

Quick take

Compare the two impact drivers below and see side-by-side results from our lab testing to determine which model is right for you.

Brand Ryobi
Platform 18V One+
Motor Brushless
Tested torque in-lbs 609.0
IPM 4,000.0
Drive modes 4
Collet 1/4-inch hex
Same as PBLID02B
Brand Makita
Platform 18V LXT
Motor Brushless
Tested torque in-lbs 595.2
IPM 3,800.0
Drive modes 8
Collet 1/4-inch hex
Same as XDT19

Editorial opinion

Rating

4.11 / 5 stars

Methodology used: Heavy duty

Pros

  • Exceptional driving speed
  • Several drive modes improve versatility
  • Brushless motor
  • Easy-insert collet

Cons

  • Battery run time
  • Footprint is bulky
  • Heavy

Rating

4.62 / 5 stars

Methodology used: Heavy duty

Pros

  • Compact footprint
  • Long battery run time
  • Brushless motor
  • Drive modes
  • Driving speed
  • Long tool and battery warranty
  • Versatile light

Cons

  • Poor noise performance
  • Requires two hands to remove bits

Global rankings

21 models tested

TestResultRank
Driving speed (sec.)14.75
Torque (in-lbs)609.012
Battery run time (min.)30.015
RPM2,966.013
Bare weight (lbs)2.3218
Impacting noise (dBA)96.94
TestResultRank
Driving speed (sec.)13.73
Torque (in-lbs)595.213
Battery run time (min.)48.06
RPM3,296.05
Bare weight (lbs)1.885
Impacting noise (dBA)96.615

Recommended configuration

PBLID02K

Includes (2) One+ 18V HP 2Ah battery

Lab results

Torque

Ryobi PBLID02Torquemeter
Ryobi PBLID02 Torque Charts

Max torque drive mode 1 (in-lbs): 609.0
Max torque drive mode 2 (in-lbs): 457.2
Max torque drive mode 3 (in-lbs): 284.4
Max torque drive mode 4 (in-lbs): N/A

The PBLID02 is moderately powerful, as our torque tests demonstrated. In practice, we didn’t encounter a driving task the PBLID02 couldn’t complete, including driving long and big lag bolts into treated lumber. This impact driver doesn’t offer high RPMs, leaving its torque output to do most of the heavy lifting in demanding tasks.

Several closely-priced alternatives offer higher torque output, including the Milwaukee M18 Fuel 2953-20, Dewalt 20V Max XR DCF887, and Dewalt 20V Max XR DCF845.

Compare torque test results

Torque

Makita XDT19Z Torquemeter
Makita XDT19Z Torque Charts

Max torque drive mode 1 (in-lbs): 595.2
Max torque drive mode 2 (in-lbs): 577.8
Max torque drive mode 3 (in-lbs): 275.4
Max torque drive mode 4 (in-lbs): 275.4

The XDT19Z offers flagship-level driving speed with its high max RPM. But its torque profile is more subtle and doesn’t compete with the highest torque impact drivers we’ve tested, such as the Milwaukee M18 Fuel 2953-20.

The XDT14Z won’t perform as well in demanding torque applications, including busting loose stubborn bolts, as it will driving screws quickly, which it excels at

Compare torque test results

RPM

Ryobi PBLID02 RPM Charts

Max RPM drive mode 1 (fwd.): 2,966.0
Max RPM drive mode 2 (fwd.): 1,832.0
Max RPM drive mode 3 (fwd.): 915.0
Max RPM drive mode 4 (fwd.): 1,058.0
Max RPM drive mode 1 (rev.): 2,969.0
Max RPM drive mode 2 (rev.): 1,935.0
Max RPM drive mode 3 (rev.): 931.0
Max RPM drive mode 4 (rev.): 1,940.0

The PBLID02 generated middle-of-the-pack max RPM on our contact tachometer. However, the performance on paper undersells its driving performance. Impact drivers with similar RPM and torque profiles couldn’t match the PBLID02’s results in our heavy-duty driving speed tests.

The three speed modes have no significant RPM difference between forward and reverse. But the assist mode offers a vastly different RPM profile depending on the forward or reverse setting selected. The assist mode in reverse nearly doubles the RPM output compared to the forward setting to quickly remove screws from your work material after the start and stop mechanism completes its cycle.

Compare RPM test results

RPM

Makita XDT19Z RPM Charts

Max RPM drive mode 1 (fwd.): 3,296.0
Max RPM drive mode 2 (fwd.): 2,867.0
Max RPM drive mode 3 (fwd.): 1,794.0
Max RPM drive mode 4 (fwd.): 964.0
Max RPM drive mode 1 (rev.): 3,296.0
Max RPM drive mode 2 (rev.): 2,914.0
Max RPM drive mode 3 (rev.): 1,848.0
Max RPM drive mode 4 (rev.): 1,022.0

The XDT19Z has a comparatively high max RPM, great for driving screws rapidly. Other impact drivers with high RPM readings can suffer from frequent cam-out and stripped screws, but the XDT19Z’s array of drive modes fixes this potential issue.

While we didn’t test the RPM for the bolt loosening assist setting, the trigger is noticeably more sensitive in reverse when using this drive mode, resulting in the RPM ramping quicker with a shorter trigger pull than other drive modes.

Compare RPM test results

Driving speed

GRK total driving time forward (sec.): 14.7
GRK average driving time forward (sec.): 2.9
GRK total driving time reverse (sec.): 11.0
GRK average driving time reverse (sec.): 2.2

While it doesn’t have the highest torque or RPMs, the PBLID02 performed well in our driving speed tests, finishing near the top of the pack driving GRK RSS screws. The PBLID02 similarly shines at driving decking screws and shorter common screw sizes used in DIY projects and medium-duty tasks around the home.

Compare driving speed test results

Driving speed

GRK total driving time forward (sec.): 13.7
GRK average driving time forward (sec.): 2.7
GRK total driving time reverse (sec.): 10.1
GRK average driving time reverse (sec.): 2.0

The combination of the XDT19Z’s torque, impacts per minute, and high RPM results in fantastic driving performance. We tested the driving speed using the highest-frequency impact setting and achieved speeds that were among the fastest we’ve come across.

The Milwaukee M18 Fuel 2953-20 and Dewalt 20V Max XR DCF845 are alternatives if you want to squeeze out slightly improved driving speed.

Compare driving speed test results

Drive modes

Drive modes: 4
Drive mode 1:  High speed 
Drive mode 2:  Medium speed 
Drive mode 3:  Low speed 
Drive mode 4:  Assist 
Variable speed trigger: Yes

There are four drive modes on the PBLID02, significantly improving its driving versatility. Drive mode 1 offers the highest torque and RPM output and is ideal for rapidly driving lag bolts, decking screws, and other big fasteners.

Drive mode 2 still offers solid driving performance but is better suited to driving shorter screws into dimensional lumber and soft materials such as MDF. We could recess screws in all material densities in drive mode 2, though not at a consistent depth.

Drive mode 3 most accurately recesses screws and is the best setting if demanding a consistently perfect recess. For light and medium-duty jobs, we found a sweet spot of using drive mode 3 or 2 to drive screws quickly, then switching over to drive mode 3 for a consistent recess.

The PBLID02 also includes an assist mode, though we didn’t find it any better than the other drive modes in the forward setting. However, the assist mode is helpful in the reverse setting to bust loose stubborn screws and nuts. When holding the trigger, the collet starts and stops several times and then ramps up the RPM. This assist setting nicely helped to avoid stripping screw heads.

There are no other specialty drive modes that high-end impact drivers include, such as self-tapping, wood, and bolt-loosening drive modes. Several Milwaukee impact drivers have self-tapping options, and some Makita impact drivers include specialty wood and bolt-loosening modes.

Drive modes

Makita XDT19Z Drive Modes

Drive modes: 8
Drive mode 1:  Max impact 
Drive mode 2:  Hard impact 
Drive mode 3:  Medium impact 
Drive mode 4:  Soft impact 
Variable speed trigger: Yes

Makita’s high-end impact drivers are packed with drive mode configurations that give you unmatched driving versatility, essentially giving you a single tool that handily tackles light and heavy-duty tasks. You can select from four impact-frequency settings, and there are also four assist modes for driving screws into different materials and for loosening bolts. The eight driving modes can also be programmed to the quick mode-switching button near the trigger for toggling to a saved favorite drive mode.

Drive modes we label as 1, 2, 3, and 4 advertise max impacts per minute of 3800.0, 3600.0, 2600.0, and 1100.0, respectively.

When pressing the assist button, you can select from the following drive modes:

  • Wood: Prevents a screw from stripping and helps set the screw into your work material by starting with a slow RPM and then increasing the RPM once the hammer begins impacting.
  • Bolt loosening: The tool automatically stops once a bolt is loosened in reverse mode. This action ensures that bolts don’t fall off. The trigger is also more sensitive, so the RPMs ramp faster with a shorter pull.
  • Self-tapping 1: Prevents screws from over-tightening by stopping the tool soon after impacts start.
  • Self-tapping 2: Prevents cam-out and stripping of screws by slowing the RPM when impacts begin.

The assist modes are more than a marketing gimmick and work well in practice. The wood assist mode finishes screws nicely into your work material, and the jolt of turbo is welcome for longer screws. Consider that you lose some precision driving the screw to a desired depth as the RPM ramps.

The self-tapping modes precisely drive screws into thin or thicker metal and lower-density materials without over-tightening.

Collet

Ryobi PBLID02 Collet Closeup

Collet size: 1/4-inch hex
Quick-change collet: Yes
Bit-eject collet: Yes
Easy-insert collet: Yes

The PBOID02 includes an easy insert collet that is a breeze to insert bits with one hand, great for convenience. A bit-eject collet is also included, although the jettison force may be slightly overpowered for some tastes. We found ourselves jettisoning the bit and frequently missing catching it. But after a few rounds of usage, catching the bit is easy and isn’t an issue.

Collet

Makita XDT19Z Collet Closeup

Collet size: 1/4-inch hex
Quick-change collet: Yes
Bit-eject collet: No
Easy-insert collet: No

The XDT19Z requires two hands to remove a bit since it doesn’t include a bit eject collet. Makita’s collets don’t smoothly accept an inserted bit like Dewalt and Ryobi models, but you can insert a bit with one hand on the XDT19Z without extending the collet.

Most Dewalt impact drivers are ideal for one-handed bit changes since these impact drivers include a well-designed easy-insert and bit-eject collet.

Motor

Motor: Brushless
Impacts per minute: 4,000.0

One standout feature of the PBLID02 is that it includes a brushless motor. Brushless motors are more efficient and durable and provide better battery run time than brushed motors.

The brushless motor and the high 4000.0 impacts per minute partly explain why the PBLID02 shined in our driving speed tests.

Motor

Motor: Brushless
Impacts per minute: 3,800.0

The XDT19Z includes a brushless motor, which offers vast performance improvements over brushed motors. The brushless motor improves longevity and driving performance and increases battery run time.

The advertised impacts per minute are one feature that doesn’t jump off the specs sheet. However, this spec doesn’t tell the whole story. The XDT19Z shined in our driving tests, including its snappy speed when driving big bolts and other screws.

Battery run time

Power type: Cordless
Battery run time (min.): 30.0
Battery tested: 18V One+ High Performance 2Ah (PBP003)
Voltage: 18

One letdown of the PBLID02 was its battery run time in our testing. Several cheaper Ryobi impact drivers offer better run times. But consider that the tested no-load run time of 30 minutes is still long enough for most jobs around the home.

We tested battery run time with the 2Ah battery version. With an 18V One+ 4Ah or 6Ah battery, expect the battery run time to continue underperforming competing models running the same Ah setup, albeit run time increases significantly.

Compare battery test results

Battery run time

Power type: Cordless
Battery run time (min.): 48.0
Battery tested: 18V LXT 2Ah (BL1820B)
Voltage: 18

Makita’s 18V XDT lineup has outstanding battery run time performance, which holds with the XDT19Z. While the run time falls slightly behind the Makita 18V LXT XDT14Z and Makita 18V LXT XDT13Z, the no-load battery run time is still among the best we’ve tested.

We tested battery run time with the 2Ah battery version. We expect the battery run time to perform similarly well when running the XDT19Z with an 18V LXT 5Ah battery and comparing it with 5Ah setups from other brands.

Compare battery test results

Charging time

Ryobi 18V Fuel Gauge

Charger tested: Ryobi 18V One+ (PCG002)
Charging time 2Ah battery (min.): 49.0
Charging time 2.5Ah battery (min.): Not tested
Charging time 4Ah battery (min.): 117.0
Charging time 5Ah battery (min.): Not tested
Charging time per Ah (min.): 26.9
Fuel gauge: On battery

The 18V charger included with most Ryobi kits (model PCG002) charges batteries moderately slower than other brands.

Our tests took 49.0 and 117.0 minutes to charge a Ryobi 18V One+ 2Ah and 4Ah battery, respectively. Several other brands we’ve tested take approximately 20 minutes per Ah, whereas the Ryobi charger takes at least 24.5 minutes per Ah.

Compare charging test results

Charging time

Makita 18V Fuel Gauge

Charger tested: Makita LXT Rapid Optimum (DC18RC)
Charging time 2Ah battery (min.): 24.0
Charging time 2.5Ah battery (min.): Not tested
Charging time 4Ah battery (min.): Not tested
Charging time 5Ah battery (min.): 51.0
Charging time per Ah (min.): 11.1
Fuel gauge: On battery

The Rapid Optimum charger (DC18RC) included in most Makita kits charges batteries exceptionally fast. Our tests found that this charger tops off 5Ah batteries in less time than it takes to charge smaller-capacity 2Ah batteries from other brands using their standard kit chargers.

Makita’s DC18RC charger only charges a single battery voltage. You’ll need a dedicated charger for your 12V and 18V Makita tools. Many Milwaukee drills and Dewalt drills come in kits with chargers that charge multiple voltage batteries in one, conveniently saving space in your shop if you have several tools on those platforms.

Compare charging test results

Design & ergonomics

Stands upright w/o battery: Yes
Stands upright w/ battery: Yes
Grip material: Rubber overgrip
Magnetic holder: No
Bit holder: No
Belt hook: Yes
Handle angle (deg.): 80.0
Head angle (deg.): 90.0

Design & ergonomics

Stands upright w/o battery: Yes
Stands upright w/ battery: Yes
Grip material: Rubber overgrip
Magnetic holder: No
Bit holder: No
Belt hook: Yes
Handle angle (deg.): 82.0
Head angle (deg.): 90.0

Weight

Ryobi PBLID02 On Scale

Bare weight (lbs): 2.32
Weight w/ 2Ah battery (lbs): 3.28
Weight w/ 2.5Ah battery (lbs):  Not tested
Weight w/ 4Ah battery (lbs): 3.96
Weight w/ 5Ah battery (lbs): Not tested

The PBLID02 is a heavy impact driver, so it’s not ideal for long driving sessions where arm fatigue sets in.

The working weight can differ significantly depending on the battery run in your setup, which is why we tested the weight in different configurations. To keep it lightweight, we recommend combining the PBLID02 with Ryobi’s 18V One+ 2Ah battery for a good balance of performance and weight.

If weight is less of a concern, pair the PBLID02 with Ryobi’s 18V One+ 4Ah battery for a longer run time and improved driving performance.The Makita 18V LXT XDT13Z or Makita 18V LXT XDT14Z are solid alternatives that are comparably-priced impact drivers and far lighter.

Compare weight test results

Weight

Makita XDT19Z On Scale

Bare weight (lbs): 1.88
Weight w/ 2Ah battery (lbs): 2.72
Weight w/ 2.5Ah battery (lbs):  Not tested
Weight w/ 4Ah battery (lbs):  Not tested
Weight w/ 5Ah battery (lbs): 4.22

The XDT19Z is one of the lighter bare tools in the 18V XDT lineup, which is already light compared to many similar impact drivers that more commonly approach 2.25 lbs.

The working weight can differ significantly depending on the battery run in your setup. To keep it as lightweight as possible, we recommend combining the XDT19Z with Makita’s 18V LXT 2Ah battery for a good balance of performance and weight.

If weight is less of a concern, pair the XDT19Z with Makita’s 18V LXT 5Ah battery for a longer run time and improved driving performance.

Compare weight test results

Footprint

Ryobi PBLID02 Footprint1
Ryobi PBLID02 Footprint2

Max height (bare tool, in.): 7.500
Max width (bare tool, in.): 3.000
Collet to back length (in.): 5.625
Base length (bare tool, in.): 5.125
Base width (bare tool, in.): 3.000
Trigger circumference (in.): 6.500
Handle circumference (in.): 5.250

Most Ryobi impact drivers have a bulky footprint, and that’s no different with the PBLID02. Notably, the base is more prominent than many similarly-priced impact drivers.

Context is important when discussing the length. The collet-to-back length isn’t as oversized as many Ryobi models that are incredibly large, though it’s not as compact as impact drivers from other brands.

So, the PBLID02 better reaches into tight spaces than other Ryobi models but doesn’t match the clearances possible looking to other brands, as demonstrated in our interior clearance tests below.

Compare footprint test results

Footprint

Makita XDT19Z Footprint1
Makita XDT19Z Footprint2

Max height (bare tool, in.): 7.375
Max width (bare tool, in.): 3.125
Collet to back length (in.): 4.500
Base length (bare tool, in.): 3.625
Base width (bare tool, in.): 3.125
Trigger circumference (in.): 6.250
Handle circumference (in.): 5.125

The XDT19Z is exceptionally compact and squeezes nicely into tight spaces with its short collet-to-back length, which is among the most compact we’ve tested outside of sub-compact impact drivers.

Compare footprint test results

Driving clearance

Min. interior width clearance (in.): 8.250
Min. top edge clearance (in.): 1.250
Min. interior 45-deg. clearance (in.): 6.500

We don’t recommend the PBLID02 if you consistently drive fasteners in tight spaces. A sub-compact or smaller-footprint compact impact driver can squeeze into tighter spaces.

The long collet-to-back length and extensive base limit the tight spaces it can fit into and the restricted areas it can fit through.

Compare driving clearance test results

Driving clearance

Min. interior width clearance (in.): 7.375
Min. top edge clearance (in.): 1.000
Min. interior 45-deg. clearance (in.): 5.750

The XDT19Z has a short length from the collet to the back, squeezing well into small openings and tight corners. The XDT19Z is one of the few models we’ve tested that broke the 6-inch threshold in our interior 45-degree driving clearance test.

Compare driving clearance test results

Noise

PBLID02 Impact Driver Noise Chart

Max noise no load (dBA): 86.1
Max impacting noise (dBA): 96.9

The PBLID02’s noise profile is a tale of two stories. When impacting, it is one of the quieter impact drivers we’ve tested, though all impact drivers are loud. The PBLID02 is one of the louder impact drivers when not under load. In practice, paying attention to the noise output when impacting is more critical.

The Milwaukee M12 Fuel Surge 2551-20 and Milwaukee M18 Fuel Surge 2760-20 are other options to consider. Both are hydraulic impact drivers with far quieter impacts.

Compare noise test results

Noise

XDT19Z Impact Driver Noise Chart

Max noise no load (dBA): 80.4
Max impacting noise (dBA): 96.6

One letdown is the noise performance. While no impact driver is a joy to listen to, the XDT19Z is among the louder models we’ve tested when impacting.

The Milwaukee M12 Fuel Surge 2551-20 and Milwaukee M18 Fuel Surge 2760-20 are quieter options since both are hydraulic impact drivers with subtler impacts, albeit lower torque.

Compare noise test results

Vibration

Max head vibration no load (m/s2): 88.2
Max grip vibration no load (m/s2): 3.1

Compare vibration test results

Vibration

Max head vibration no load (m/s2): 14.8
Max grip vibration no load (m/s2): 2.9

Compare vibration test results

Light

Ryobi PBLID02 Light
Ryobi PBLID02 Light Closeup

Light: Yes
Light on/off: No
Number of lights: 1
Light time delay (sec.): 15.0

We’re not huge fans of the PBLID02’s work light, though it does the job in some scenarios. The light is set into the base and shines upward, whereas other models include the light around the collet and point it straight forward. The latter design approach centers the light directly where you’re driving screws.

When driving long screws with the impact driver further away from the work material, we found the PBLID02’s light was centered slightly above the screw being driven. This outcome was only an issue when driving 3-inch and longer screws.

There is no dedicated flashlight feature or the ability to disable the work light, which could minimally improve battery performance.

Light

Makita XDT19Z Light
Makita XDT19Z Light Closeup

Light: Yes
Light on/off: Yes
Number of lights: 2
Light time delay (sec.): 10.0

The XDT19Z’s light illuminates work surfaces well with a large coverage area. Nicely, you can enable or disable the light by holding the drive mode settings button for a few seconds. Turning off the light is good for versatility and saves battery life. Otherwise, there is a 10-second delay for the light to turn off after releasing the trigger.

Another unique feature is that the XDT19Z acts as a dedicated flashlight. Set the forward/reverse switch to the neutral position, then squeeze the trigger to turn on the light and squeeze it again to turn off the light.

Warranty

Tool warranty (years): 3
Battery warranty (years): 90 day

Ryobi offers an exceptionally-long three-year warranty on its impact drivers. However, Ryobi’s battery warranties don’t come close to matching the length provided by most other manufacturers. Ryobi has a 90-day battery warranty, whereas other manufacturers commonly offer two to three years of coverage.

Warranty

Tool warranty (years): 3
Battery warranty (years): 3

Makita stands behind the durability of its impact drivers with exceptionally-long warranties. The XDT19Z has a three-year warranty. Makita 18V LXT batteries include a three-year warranty as well.

Picture of Nathan Hamilton
Nathan Hamilton
Nathan Hamilton is the founder of DIY Gear Reviews and a recognized expert in the home and DIY space. He has over 200 bylines covering topics such as power tools, hand tools, and woodworking. Nathan is the strategic director for DIY Gear Reviews, deciding everything from the content covered to designing the testing methodologies for lab-tested reviews. He can be emailed at nhamilton@diygearreviews.com.

Related

Leave a Comment